Difference between revisions of "Laser Mount Switching System OXP"

From Elite Wiki
(Quick Facts)
(LMSS Installation)
Line 12: Line 12:
 
An additional piece of equipment, the LMSS Actuator Upgrade, can be purchased at techlevel 13 systems. This upgrade speeds up the switching process, almost halving the time it takes to switch between lasers.
 
An additional piece of equipment, the LMSS Actuator Upgrade, can be purchased at techlevel 13 systems. This upgrade speeds up the switching process, almost halving the time it takes to switch between lasers.
   
The LMSS can only be used with the standard lasers (pulse, beam, mining and military lasers). The LMSS cannot be installed at ant laser mount that has a custom laser (ie OXP) in place.
+
The LMSS can only be used with the standard lasers (pulse, beam, mining and military lasers). The LMSS cannot be installed at any laser mount that has a custom laser (ie OXP) in place.
   
 
== LMSS and Laser Temperature ==
 
== LMSS and Laser Temperature ==

Revision as of 03:55, 1 July 2015

Overview

The Laser Mount Switching System, or LMSS, gives pilots the ability to have a choice of lasers at each of their laser mounts, and easily switch between them. This allows pilots to have multiple configurations of their ships, to cater for different roles.

Sales Pitch

The Kaiser Model X5115 Laser Mount Switching System, or LMSS, gives you, the pilot, complete control of the configuration of your ship. Gone are the days of having to make a painful, and potentially fatal, decision about what laser to install in what position. Maybe you'd like to do a bit of mining on the side, but shooting out of the rear or side mounts is awkward. Now you can install your favoured beam or military laser in the front mount, and using the LMSS, also install a mining laser. When you're fighting off some pirates, your main laser is installed. When you're chewing up asteroids and scooping the bounty, you can switch to your mining laser.

Or perhaps you prefer to use the beam laser for close quarters fighting, but you also like to snipe using the military laser. With the LMSS, switching between the two is easy.

LMSS Installation

There are two components to the LMSS system: the assembly, plus an additional laser. The assemblies can be purchased at any system with a techlevel of 8. If the pilot wants switchable lasers in all four laser mounts, then four LMSS systems must be purchased. After the assembly is installed on a laser mount, the pilot can then choose what additional laser they want to install. The additional lasers are identical to the standard lasers, but come with a small additional cost for installation. The additional lasers are only available where their standard counterparts are available. That is, the LMSS Military Laser can only be purchased where a standard military laser is available.

An additional piece of equipment, the LMSS Actuator Upgrade, can be purchased at techlevel 13 systems. This upgrade speeds up the switching process, almost halving the time it takes to switch between lasers.

The LMSS can only be used with the standard lasers (pulse, beam, mining and military lasers). The LMSS cannot be installed at any laser mount that has a custom laser (ie OXP) in place.

LMSS and Laser Temperature

The LMSS installs an additional laser mount beneath the existing mount, and includes an assembly and actuator to switch the mounts around. However, the heat dispersal system is shared between both mounts. Heat that is accumulated on one laser still needs to be dispersed even if the secondary laser is activated. Switching lasers does not give the pilot more firepower.

Operation

Once the assembly and secondary lasers are installed, the process to switch lasers is as follows:

  1. Select the view where the assembly is installed (front, aft, port, or starboard).
  2. Select the primable equipment "LMSS Activator"
  3. Activate the equipment by pressing "n" on the keyboard.

There will be a delay between dismounting the current laser and mounting the secondary one. During that delay no laser can be fired in that position.

Damage

If the LMSS assembly is damaged while it is switching lasers, the laser mount will be unavailable until the next time the ship docks. Upon docking, the primary laser will be restored to its mount, but the switching mechanism will be unavailable until repaired.

Availability

LMSS Assembly
Cost: 3,600 Cr. per mount point
Techlevel: 8

LMSS Actuator Upgrade
Cost: 4,200 Cr.
Techlevel: 13

OXP Installation

Place the 'LaserMountSwitchingSystem.oxz' into your 'AddOns' folder and when you start the game, hold down 'Shift' until you see the spinning Cobra.
Alternatively, you can download the expansion using the expansion pack manager in the game itself.

Download

Download v1.0.4 LaserMountSwitchingSystem.oxz (downloaded 4747 times).
Alternative download for the OXZ from here.
To download this as a OXP inside a ZIP file, click here. You will need to extract the OXP folder to your AddOns folder to use this option.

Licence/Author

This work is licensed under the Creative Commons Attribution-Noncommercial-Share Alike 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/4.0/ or send a letter to Creative Commons, 171 Second Street, Suite 300, San Francisco, California, 94105, USA.
Sound files taken from "Large Industrial Robot" WAV file, created by Mike Koenig and sourced from soundbible.com. Licensed under Creative Commons Attribution 3.0.
The expansion pack was developed by phkb.

Version History

1.0.4

  • Fixed techLevel setting for Actuator upgrade
  • Fixed damageProbability of the Actuator upgrade so it can be damaged, and added a check to switch the delay back to 10 seconds when it is damaged.

1.0.3

  • Fixed a bug where a ship with no laser in a laser mount would cause an error.
  • Added maintenance item descriptions for integration with email system maintenance overhaul email
  • Adjusted costs of equipment items to be less premium.
  • Added sounds to accompany the laser switching process.

1.0.2

  • Fixed the "shipDied" function to correctly shut down timers when the player dies.

1.0.1

  • Fixed bug where docking (or dying) while switching weapons would cause some unpredictable results.
  • If an OXP laser gets installed after the LMSS system, the LMSS will now not switch the laser and potentially lose it.
  • If a LMSS laser is purchased to replace an existing laser, a refund is now given on the laser that is removed (100% of standard laser cost).
  • Code refactoring
  • Put correct tags in manifest file.

Version 1.0

  • Initial release

Quick Facts

Version Released License Features Category Author(s) Feedback
1.0.4 2015-03-06 CC BY-NC-SA 4.0 Weapons Equipment OXPs phkb Oolite BB

Gameplay and Balance indicator

Tag-colour-blue.png




Oolite Equipment
Standard Equipment
Astrogation ConsoleCargo HoldCompassEnergy banksEngine/Main Drive • HUDIFF ScannerLife Support SystemsMissilePulse LaserShieldsShip's HullTorus Jump DriveView Screen • Witchspace/Hyperspace Drive
Optional Equipment
Advanced Navigational ArrayAdvanced Space CompassCargo Bay ExpansionDocking ComputersE.C.M. SystemEscape PodExtra Energy UnitExternal Heat ShieldingFuel ScoopsGalactic HyperdriveIntegrated Targeting SystemMilitary Shield EnhancementMulti-Targeting SystemNaval Energy UnitPassenger BerthScanner Targeting EnhancementShield BoostersTarget System Memory ExpansionWitchdrive Fuel InjectorsWormhole Scanner
Weapons
Beam LaserECM Hardened MissileEnergy BombMilitary LaserMining LaserMissilePulse LaserQuirium Cascade MineTwin Plasma Cannon